Filter
Top Products
Driver Installation Under Windows
56 3ware 9000 Series Serial ATA RAID Controller Installation Guide
5Type S if you have additional devices to add. Otherwise, press
Enter.
6 If the “Digital Signature Not Found” message appears, click
Yes to continue the installation.
(If there are multiple controllers in the system, you will see this
message once for each controller.)
7 Continue with the normal Windows installation at this point.
There are no instructions after installing the driver that are
specific to 3ware. If you need additional instructions, refer to
the Windows 2000, Windows XP, or Windows Server 2003
documentation supplied by Microsoft.
8Turn to page 56 and follow the instructions for “Making Units
Managed by a 3ware Controller Available to Windows”.
Installing the Driver on a System that
Boots from a Different Device
If you are installing the 3ware RAID controller on a system that
already has the operating system installed on another drive, follow
the instructions in this section, depending on the version of
Windows installed on your system:
“To install the 3ware driver under Windows 2000” on page 57
“To install the 3ware driver under Windows XP or 2003” on
page 60