Filter
Top Products
Panel and Jumper Definition
12
JP4: Rear USB Device Wake up Selection (USB Connector
USB1)
Pin No. Definition
1-2 Close Normal (Default)
2-3 Close USB Device Wake up
1
(If you want to use "USB Dev Wakeup From S3-S5"
function, you have to set the BIOS setting "USB Dev
Wakeup From S3-S5" enabled, and the jumper "JP4"
enabled).
*(Power on the computer and as soon as memory
counting starts, press <Del>. You will enter BIOS Setup.
Select the item "POWER MANAGEMENT SETUP", then
select "USB Dev Wakeup From S3-S5: Enabled".
Remember to save the setting by pressing "ESC" and
choose the "SAVE & EXIT SETUP" option.)
USB1
JP7: STR Function Enabled (Suspend To RAM)
Pin No. Definition
Open Normal (Default)
Close STR Enabled
1
JP9: Onboard Sound Function Selection (Optional)
1
JP9
Pin No. Definition
1-2 close Onboard Sound
Enable (Default)
2-3 close Onboard Sound
Disable