Filter
Top Products
7ZX-1 Motherboard
27
•
••
• USB Controller
Enabled Enabled USB Controller. (Default Value)
Disabled Disabled USB Controller.
•
••
• USB Legacy Support
Keyboard/FD
D
Set USB Legacy Support Keyboard / Floppy.
KB/Mouse/F
DD
Set USB Legacy Support Keyboard / Mouse /Floppy.
Disabled
Disabled USB Legacy Support Function. (Default
Value)
•
••
• BIOS Flash Protection
Enabled BIOS Flash Write Protection.
Disabled Normal. (Default Value)
•
••
• DRAM Drive Strength
Auto Set DRAM Drive Strength Auto. (Default Value)
Manual Set DRAM Drive Strength Manual.
If DRAM Drive Strength is Manual, then you can adjust item below.
•
••
• MD Bus Strength
High Set MD Bus Strength High. (Default Value)
Low Set MD Bus Strength Low.
•
••
• CAS Bus Strength
High Set CAS Bus Strength High. (Default Value)
Low Set CAS Bus Strength Low.
•
••
• Delay DRAM Read Latch
1.0ns Set DRAM Read Latch Delay 1.0ns. (Default Value)
1.5ns Set DRAM Read Latch Delay 1.5ns.
0.5ns Set DRAM Read Latch Delay 0.5ns.
No delay Set DRAM Read Latch No delay.
•
••
• Memory Data Drive
6 mA Set Memory Data Drive 6 mA.
8 mA Set Memory Data Drive 8 mA. (Default Value)
•
••
• SDRAM Command Drive
16 mA Set SDRAM Command Drive 16 mA.
24 mA Set SDRAM Command Drive 24 mA. (Default Value)
•
••
• Memory Address Drive
16 mA Set Memory Address Drive 16 mA.
24 mA Set Memory Address Drive 24 mA. (Default Value)
•
••
• CAS# Drive
8 mA Set CAS# Drive 8 mA.
12 mA Set CAS# Drive 12 mA. (Default Value)
•
••
• RAS# Drive
16 mA Set RAS# Drive 16 mA.
24 mA Set RAS# Drive 24 mA. (Default Value)