Filter
Top Products
External Connection
990-4049
Installation Guide APC Silcon 240-320kW 480V UPS 35
Some computer operating systems have built-in UPS monitoring. These systems require
various hardware interfaces. Interface kits for all major operating systems that support UPS
monitoring are available from your dealer.
APC SmartSlot for APC Silcon Series UPS's has been designed for reliable and maintenance-
free service in combination with your American Power Conversion (APC) Silcon UPS Series
uninterruptible power supply (UPS).
4.6.1 SmartSlot Accessories
SmartSlot at the front of the frame accomodate up to 3 accessory cards. Before installing any
SmartSlot accessory, ensure it is a compatible "APC Silcon DUPSK" model.
1. Share-UPS TM, provides automatic shutdown of up to two additional servers.
2. Measure-UPS TM II, provides environmental information such as ambient temperature
and humidity.
3. Call-UPS TM, works with an external modem to provide out-of-band UPS manegement
4. WEB/SNMP Management card, provides web based UPS management.
4.6.2 Multiple SmartSlot Installation - introduction
If your UPS configuration uses more than one SmartSlot device, you must install them in the
correct order for them to work together properly.
Priority of SmartSlot devices:
A SmartSlot device with higher priority is to be placed in the SmartSlort accessory slot with
the higher number. Refer to the following table.
Priority of APC accessories:
Install SmartSlot accessories as dictated by the following table. An accessory with higher
priority is to be placed in the accessory slot with the higher number.
Installing accessories – procedure
To install accessories, perform the following steps:
1) Make sure that the APC Silcon UPS is powered off.
2) Install the SmartSlot accessories into the housings on the front of the chassis.
See the instructions supplied with the accessories and “Priority of APC accessories.”
If your UPS has one SmartSlot accessory slot
If your UPS has exactly one SmartSlot accessory slot, use this accessory slot for the SmartSlot
device with the lowest priority.
Acessory P/N Priority Position
Web/SNMP Management Card AP9606S Highesst High-numbered slot
Call-UPS® // AP9608 Second-highest
Interface expander AP9607 Second-lowest
Measure-UPS® // AP9612T
AP9612TH
Lowest
Low-numbered