Filter
Top Products
Rack Assembly
Battery Rack Assembly and Installation Manual 15
Stabilizing the rack
Bolt (4) Rear Cross Braces to rack at designated hole positions. Use (8) M12 x 35 bolts and related
hardware: (16) 12mm washers, (8) 12mm lockwashers and (8) M12 nuts. Note that lower bolts on
Brace #1 and Brace #2 also connect the Top Side Assemblies to the Bottom Side Assemblies.
Rear Cross Brace #1
(870-3697)
Rear Cross Brace #2
(870-3697)
Rear Cross Brace #3
(870-3697)
Rear Cross Brace #4
(870-3698)
Top Side Assembly #2
Top Side Assembly #1
Bottom Side Assembly #2
Bottom Side Assembly #1
REAR OF RACK
M12 x 35 Bolt
(803-1235)
12mm Washers
(812-0039)
12mm Lockwasher
(812-0038)
M12 Nut
(803-1200)