Filter
Top Products
5
General Navigation
Note: Throughout this manual the four navigation keys will be repre-
sented as: Esc,
, , and Enter ( ). Specific menus are refer-
enced in the form Display:Password where Display refers to a
menu item in the top-level menu and Password refers to a sub-
menu of Display.
The default screen will appear when PowerView is first powered on or
after any extended period of inactivity.
Pressing any key will access the top level menu.
When in any menu, pressing
or will move the cursor ( ).
The Enter key (
) will advance you deeper into the menu tree.
The Esc key will back out to the parent menu. The menu tree is out-
lined in the following pages.
For status or information screens there is no
cursor, the or
keys act like page up/down keys to show multiple screens, if appropri-
ate. For settings menus, point (
) to a parameter and press Enter
(
); the cursor will move adjacent to the parameter value and be-
come a
. The or keys will now increment or decrement the value.
The value displayed takes effect immediately. When the desired value
is displayed, press either Esc or Enter (
) to exit the selection
mode. (Both Esc and Enter (
) have exactly the same function in
this case.)
Pressing
and simultaneously will display context sensitive help on
most screens and menus.
Note that control and configuration functions can be password pro-
tected (see the Display:Password menu). Also, the ‘default’ screen is
user configurable (see the Display:Config menu).