Filter
Top Products
11
Quick Configuration
Required and
optional
settings
You must configure the following network settings of the
Environmental Monitoring Unit before it can function on a
network.
•
IP
address of the unit
• Subnet Mask
•
IP
address of the Default Gateway
No further configuration is required. The remaining properties
of the unit have default settings. However, you may want to
customize settings for your application. See “Managing the
Unit” in the
User’s Guide
(
usrguide.pdf
).
Configuring
TCP/IP
settings
Choose the configuration method that matches your
environment:
• If you are using Windows
95
, Window
98
, or Windows
NT
, see “Through the Management Card Wizard” on
this page.
• If you are not using a Windows-based platform, or if
you require direct serial configuration, see “Serially
through the Control Console” on page 12.
• If you are a network administrator using a computer
connected to the local subnet, see “Over the Network by
ARP” on page 13.
• If you are a network administrator using
BOOTP
, see
“Over the Network by BOOTP” on page 13.
Through the Management Card Wizard. The
Environmental Monitoring Unit contains a management card
that provides the network interface. On a Windows
95
,
Windows
98
, or Windows
NT
4.0
workstation, the
Management Card Wizard provides a quick way to configure
all management card settings, including
TCP/IP
settings. To
access the Management Card Wizard, run the program
setup.exe on the
CD-ROM
supplied with the unit, and follow
the on-screen instructions.
Continued on next page