Filter
Top Products
5
Installation,
continued
Installing in an
enclosure,
continued
4. Attach the assembly tightly to the enclosure using four
mounting screws and four plastic cup washers (provided
with the enclosure).
Connecting the
probe(s)
1. Connect the supplied probe (
AP9512TH
) to one of the
probe connectors on the unit. Seat the probe connector
firmly, and connect the second probe (if you have one).
2. Using the supplied hook and loop fasteners, if needed,
place each probe in an area that is within the
environmental limits specified on page 19. The location
must be free from direct sunlight, excessive moisture
(such as dew), dust, chlorine gas, and insecticides. Do
not cover any of the probe’s ventilation holes.
3. Connect the supplied power adapter to the power port
labeled
24VDC
on the front panel of the unit.
Continued on next page