Filter
Top Products
4
Installation
Installing
outside an
enclosure
To install the Environmental Monitoring Unit outside an
enclosure, place it on a flat surface in a protected area with
adequate air flow and minimal dust. Do not operate the unit
where temperature and humidity are outside the limits
specified on page 19.
Installing in an
enclosure
To install the Environmental Monitoring Unit in a NetShelter
enclosure or other standard (
EIA-310-D
)
19
-inch rack:
1. Attach the rack-mount brackets (
870-8213A
and
870-8183
) to the unit using the four flat-head screws.
2. Insert caged nuts (provided with the enclosure) on the
vertical mounting rails at the location you choose for the
unit-bracket assembly in the enclosure.
3. Align the assembly’s brackets with the caged nuts in
Step 2.
Continued on next page