Filter
Top Products
14
Quick Configuration,
continued
Accessing the
unit
You can access the Environmental Monitoring Unit by using a
Web browser, Telnet, or
SNMP
.
Through a Web browser.
1. From the browser, enter the unit’s System
IP
address or
its
DNS
name (if a
DNS
name is configured).
2. Log on to the unit. The default User Name and
Password are apc (lowercase).
Through Telnet.
1. Type telnet and the System
IP
address of the unit.
2. Log on to the unit. The default User Name and
Password are apc (lowercase).
Through SNMP.
The default read-only community name is
public, and the default read/write community name is private.
Verifying
configuration
To confirm the basic operation of the Environmental
Monitoring Unit:
1. Log on to the unit, and select Environmental
Monitoring Status from the main menu.
2. Confirm the operation of the probe. With the probe
properly connected, the unit reports accurate
temperature and humidity. If the probe is not properly
connected, the unit reports very low temperature and
humidity values.
3. Confirm contact sensing. Activate each sensor in turn,
according to the recommendation of the sensor
manufacturer, and verify that it operates as expected.