Filter
Top Products
990-2359A Smart-UPS® VT 10-30kVA, 200/208V and XR Battery Enclosure Operation Guide 27
Network Management Card with
Environmental Monitor
The APC Network Management Card with Environmental Monitor (AP9619) is installed in the UPS
as default. It is used for remote system control and monitoring, e-mail notifications etc.
Network Management Card replacement
Loosen the 2 torx screws (one each side of the card).
Carefully pull out the card.
Reversed procedures for installation.
SEE ALSO!
For configuration and use, refer to the separate user manual - Network Management
Card with Environmental Monitor - shipped with the UPS.