Filter
Top Products
990-1060B 12/2005 2
• In order to maintain compliance with the EMC directive, output cords attached to the UPS
should not exceed 10 meters in length.
DEENERGIZING SAFETY
• If the equipment has an internal energy source (battery), the output may be energized when the
unit is not connected to an AC power outlet.
• To deenergize pluggable equipment: first press the OFF button for more than one second to
switch the equipment off. Disconnect the equipment from the AC power outlet. Unplug the bat-
tery connector. Push the ON button to deenergize the capacitors.
• Pluggable equipment includes a protective earth conductor that carries the leakage current from
the load devices (computer equipment). Total leakage current must not exceed 3.5 mA.
• Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended.
BATTERY SAFETY
• This equipment contains potentially hazardous voltages. Do not attempt to disassemble the unit.
The only exception is for equipment containing batteries. Battery replacement using the proce-
dures below is permissible. Except for the battery, the unit contains no user serviceable parts.
Repairs are to be performed only by factory trained service personnel.
• Do not dispose of batteries in a fire. The batteries may explode.
• Do not open or mutilate batteries. They contain an electrolyte that is toxic and harmful to the
skin and eyes.
• Do not connect the terminals of a battery or battery pack with a wire or other electrically con-
ductive objects.
• To avoid personal injury due to energy hazard, remove wristwatches and jewelry such as rings
when replacing the batteries. Use tools with insulated handles.
• Replace batteries with the same number and type of batteries or battery packs as originally in-
stalled in the equipment.
BATTERY REPLACEMENT AND RECYCLING
See your dealer or visit the APC web site, www.apc.com/support for information on replacement
battery kits and battery recycling.
Be sure to return the spent battery to APC for recycling. Ship it to APC in the
replacement battery packing material.