![](http://pdfasset.owneriq.net/2/f8/2f8a91bb-6d62-46e9-9819-6cf0fc3f074d/2f8a91bb-6d62-46e9-9819-6cf0fc3f074d-bg12.png)
10
4.3 Thermal Head Positioning
If you have replaced the thermal head, positioning should be checked. Verify the ribbon
running condition as well.
Note:
Make sure of the following prior to the adjustment:
• Power off the printer
• Use full width media (labels) 5.2 in./132 mm) when checking.
• Rotate the head pressure screw clockwise completely.
Figure 5. Thermal Head Block