Filter
Top Products
26
11.0 VOLTAGE CHECK AND ADJUSTMENT
Check Terminal Switch Setting and
Typ. Voltage
Usage and Adjusted By
V1 W H:20.0 +/- 0.5
L: 18.0 +/- 0.5
For Take-Up Motor
By VR1 on Motor Control
Board (TPB-2177)
V2 R H: 20.0 +/- 0.5
L: 17.6 +/- 0.5
For Ribbon Motor
By VR2 on Motor Control
Board (TPB-2177)
NOTES:
W switch for Take-Up Motor has to be set to ‘H’ side whenever Presentation Mode is
selected. In other modes, W switch should be set to ‘L’ side.
R switch for Ribbon Motor is set to ‘L’ as usual.