Filter
Top Products
Configuration
7
Solecis AVS-SL-PR-0201-0301 Presentation Switcher
Configuration
Overview
In order to correctly set up the AVS-SL-PR-0201-0301 switch please download the Solecis Device
Manager software from our website - www.Solecis.co.uk then click on support. Once installed, make
sure the switch is connected correctly to a PC serial port and then start the device installer software. The
software will scan the serial ports on the PC and find the attached device (FIG. 2).
Double click on the required port and the devices front control status will then be displayed (FIG. 3).
FIG. 3 shows the PC control panel for the AVS-SL-PR-0201-0301, it replicates exactly what is seen on
the front of the unit. Clicking on a button on the screen will have the same effect as manually pressing
the equivalent button. Click on the Unit Address to change the value set for installation where multiple
addressable units are required. When the reset interface option is checked then every time the power
supply to the unit is reset, it will initialise itself into the default mode of PC 1 selected with no mix, no
mute and the mode set to AV.
FIG. 2 Attached Devices
FIG. 3 Switch Status Monitor