Filter
Top Products
Configuration
9
Solecis AVS-SL-PR-0201-0301 Presentation Switcher
Sources Setup
Clicking on set up sources brings up FIG. 6. This allows you to set the volume attenuation levels for each
of the audio inputs. When the master volume on the front panel is adjusted, it adjusts all of the input
volume controls up to the point where the first input hits the maximum or minimum. This means the if
for example PC1 input slider was higher than PC2 then you would never be able to get PC2's volume to
the maximum because it would stop when PC1's volume reached that point.
Here is where the video input types are also set. From FIG. 6 the input to video 1 would be S-Video, to
video 2 would be composite and video 3 would also be S-Video.
Click Back to return to the main screen.
Locking Buttons
The lock buttons option allows you to select buttons that are disabled to the user (FIG. 7).
The button lockout selection mode is indicated by the lock buttons control turning red and then when a
control button is clicked the corresponding control also turns red. The items that are red are the buttons
that will not be available from the front panel. Once the required buttons are selected, clicking on the
lock buttons control will save the settings and restart the unit.
FIG. 6 Set up sources
FIG. 7 Set up sources - Lock Buttons
Even if a button is disabled on the front panel, you will still be able to action it by
sending the appropriate RS232 command into the PC Control port.