Filter
Top Products
16
2.5 I
NTERNAL
3.5”
D
EVICE
I
NSTALLATION
The DF-35 includes two Fleet-Release™ access doors. With the front bezel facing you, they are located by
default on the bottom nine drive bay slots (each door covers three drive bays).
1. Open the Fleet-Release
TM
access door.
Opening the Fleet-Release™ access door by gently
pressing the left side to release it, and then swing it open.
2. Insert your 3.5” device into the 3.5” drive cage from the front of the case. You will feel resistance
from presstabs on either side of the drive cage which will create friction against the drive. Push gently
until the drive’s mounting holes align with the screw holes in the cage.
Installing a 3.5” internal device
3. Fasten the device in place with the provided screws on both side of the drive cage.