Filter
Top Products
17
Make sure to install screws on the left side… …as well as the right side.
4. Mount any other 3.5” HDD devices accordingly.
5. Connect the appropriate power and data cables to the device(s), using cable routing as desired.
6. Close the Fleet-Release™ access door.
2.6 E
XTERNAL
3.5”
D
EVICE
I
NSTALLATION
There is one external 3.5” drive bay under the 5.25” drive bays.
Remove this drive bay cover.
1. Carefully remove the 3.5” drive bay cover from the bezel. Load the drives from the front, lining them
up to the front of the drive cage.