Filter
Top Products
22
2.8 U
SING
T
HE
T
OP
2.5”
H
OT
-S
WAP
B
AY
The DF-35’s top 2.5” hard drive bay is hot-swap capable. To use the hot-swap feature, ensure that your
motherboard is configured for hot-swap. Make sure to install all related drivers that come with your
motherboard and turn on the AHCI function in the BIOS to activate the hot swap feature.
Using the top 2.5” hot-swap drive bay
A.
L
OADING
:
1. Align your SATA HDD with the drive bay with the connector facing the case.
2. Push the HDD all the way into the bay until it locks into position.
B.
U
NLOADING
:
1. Ensure that your HDD is not in use.
2. Carefully pull the HDD out of the hot-swap drive bay.