Filter
Top Products
7
1.3
B
EFORE
Y
OU
B
EGIN
In order to ensure that your building experience with the Dark Fleet DF-35 will be a positive one, please take
note of the following:
• While working inside your Dark Fleet DF-35, keep your case on a flat, stable surface. Make sure your
build area is clean, well-lit, and free of dust.
• Antec cases feature rounded edges that minimize the occurrence of hand injuries. Nonetheless,
exercise caution and control when handling case interiors. We strongly recommend taking the
appropriate time and care when working inside the case. Avoid hurried or careless motions. Please use
reasonable precaution.
• Handle components and cards with care. Do not touch the components or contacts on a card. Hold a
card by its edges. Hold a component such as a processor by its edges, never by its pins.
• To avoid electrostatic discharge, ground yourself periodically by touching an unpainted metal surface
(such as a connector or screw on the back of this computer) or by using a wrist grounding strap.
• Before you connect a cable, ensure that both connectors are correctly aligned and oriented. Bent pins
can be difficult to fix and may require replacement of the entire connector.
• This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult your
motherboard manual for specific mounting instructions and troubleshooting. Before proceeding,
check the manual for your CPU cooler to find out if there are steps you must take before installing
the motherboard.
• Do not sit on your case. Although it is constructed of heavy-duty steel and internally reinforced, it is
not designed to support the weight of an adult, and may buckle.
• Remember to use the right tools for each task. Do not use improvised screwdrivers like coins, nails or
knife blades as they may result in damage to screw threads or even injury. Do not use your fingernails
to separate edges or lift the sides of the case, as paint chipping or injury may occur.