Filter
Top Products
29UPS Network Management Card 2 User’s Guide
How to Use the Tabs, Menus, and Links
Tabs
In addition to the tab for the Home page, the following tabs are displayed. Click a tab to display a set of
menu options:
• UPS: Display UPS status, issue UPS control commands, configure the UPS parameters, run
diagnostic tests, configure and schedule shutdowns, and view information about the UPS and
the Management Card.
• Environment: View the status of each temperature sensor, temperature and humidity sensor, input
contact, or output relay connected to the Management Card. View active environmental alarms
and recent environmental events. Configure thresholds and other parameters related to
environmental monitoring.
Note: For the UPS, the Environment tab displays only when a temperature sensor,
temperature and humidity sensor, input contact, or output relay is present.
• Logs: View and configure event and data logs.
• Administration: Configure security, network connection, notification, and general settings.
Menus
Left navigation menu. Each tab (except the tab for the home page) has a left navigation menu,
consisting of headings and options:
• If a heading has indented option names below it, the heading itself is not a navigational link. Click
an option to display or configure parameters.
• If a heading has no indented option names, the heading itself is a navigational link. Click the
heading to display or configure parameters.
Top menu bar. The Administration tab has a selection of menu options on the top menu bar. Select
one of the menu options to display its left navigation menu.
Quick links
At the lower left on each page of the interface, there are three configurable links. By default, the links
access the URLs for these Web pages:
• Link 1: The home page of the APC Web site
• Link 2: Demonstrations of APC Web-enabled products
• Link 3: Information on APC Remote Monitoring Services
To reconfigure the links, see “Configure Links” on page 81.