Filter
Top Products
UPS Network Management Card 2 User’s Guide16
dir
Access: Administrator, Device User
Description: View the files and folders stored on the Management Card.
dns
Access: Administrator
Description: Configure the manual Domain Name System (DNS) settings.
eventlog
Access: Administrator, Device User
Description: View the date and time you retrieved the event log, the status of the UPS, and the status of
sensors connected to the Management Card. View the most recent device events, and the date and time
they occurred. Use the following keys to navigate the event log:
exit
Access: Administrator, Device User
Description: Exit from the command line interface session.
Parameter Argument Description
-OM enable | disable
Override the manual DNS.
-p <primary DNS
server>
Set the primary DNS server.
-s <secondary DNS
server>
Set the secondary DNS server.
-d <domain name> Set the domain name.
-n <domain name
IPv6>
Set the domain name IPv6.
-h <host name> Set the host name.
Key Description
ESC
Close the event log and return to the command line interface.
ENTER
Update the log display. Use this command to view events that were recorded after you last
retrieved and displayed the log.
SPACEBAR
View the next page of the event log.
B View the preceding page of the event log. This command is not available at the main page of the
event log.
D Delete the event log. Follow the prompts to confirm or deny the deletion. Deleted events cannot
be retrieved.