Filter
Top Products
17UPS Network Management Card 2 User’s Guide
format
Access: Administrator only
Description: Reformat the file system of the Management Card and erase all security certificates,
encryption keys, configuration settings, and the event and data logs. Be careful with this command.
Note: To reset the Management Card to its default configuration, use the
resetToDef
command.
FTP
Access: Administrator only
Description: Enable or disable access to the FTP server. Optionally, change the port setting to the
number of any unused port from 5001 to 32768 for added security.
Example: To change the TCP/IP port to 5001, type:
ftp -p 5001
help
Access: Administrator, Device User
Description: View a list of all the CLI commands available to your account type. To view help text
for a specific command, type the command followed by
help.
Example 1: To view a list of commands available to someone logged on as a Device User, type:
help
Example 2: To view a list of options that are accepted by the alarmcount command, type:
alarmcount help
netstat
Access: Administrator, Device User
Description: View the status of the network and all active IPv4 and IPv6 addresses.
ntp
Access: Administrator, Device User
Description: View and configure the network time protocol parameters.
Option Argument Definition
-p <port number> Define the TCP/IP port that the FTP server uses to communicate with the
Management Card (21 by default). The FTP server uses both the specified port
and the port one number lower than the specified port.
-S enable | disable Configure access to the FTP server.