Filter
Top Products
- 51 -
1. Select a UDV.
2. Input “Host”, which is an initiator node name for access control, or fill-
in wildcard “*”, which means every host can access this volume.
Choose LUN and permission, then click “ ”.
3. Done.
Figure 3.6.7.6
(Figure 3.6.7.6: UDV-R5-1 is attached to LUN 0 with any hosts can access. UDV-R5-2 is
attached to LUN 1 with only initiator node named “iqn.1991-05.com.microsoft:demo” can
access.)
Step 4: Set global spare disk.
To set global spare disks, please follow the procedures.
1. Select “/ Volume config / Physical disk”.
2. Select the free disk(s) by clicking the checkbox of the row, then click
“ “ to set as global spares.
3. There is a “GS” icon shown up at status 1 column.
Tips
The matching rules of access control are from top to down by
sequence. Please refer 3.6.6 for details.