Filter
Top Products
5200/5300 Adjustments (
not
for 5260, 5280) Geometry - 15
1 Remove the three
Phillips screws that
secure the analog board
to the chassis.
2 Tilt the analog board
back, being careful not
to put stress on the
cables.
3 Locate jumper P805
(Rev. A) or P102
(Rev. B) near the logic
board connector on the
lower left corner of the
analog board.
Rev A Analog Board
Analog
Board
Monitor
Adjustment
Cable
Modem
Port
P805
P805