![](http://pdfasset.owneriq.net/2/e1/2e1a1824-c786-48ab-b4b2-d7864465d837/2e1a1824-c786-48ab-b4b2-d7864465d837-bgc1.png)
Take Apart Internal RGB Cable - 95
±Warning: This product
contains high voltage and a
high-vacuum picture tube.
To prevent serious injury,
review CRT safety in
Bulletins/Safety.
1 Disconnect the internal
RGB cable at the P703
connector on the analog
board and at the P301
connector on the video
board.
Note: You may need to
pry up one or both
ferrite beads if they are
glued to the chassis.
P703
P301
Video Board
Analog Board