![](http://pdfasset.owneriq.net/2/e1/2e1a1824-c786-48ab-b4b2-d7864465d837/2e1a1824-c786-48ab-b4b2-d7864465d837-bgf6.png)
Additional Procedures Battery Verification - 2
1 Set the voltmeter to the
10 V DC scale.
2 Hold the positive probe
of the voltmeter to the
positive end of the
battery and the negative
probe to the negative end
of the battery.
3 If the battery voltage is
below 3.0 V, replace the
battery. Refer to
“Battery Replacement”
in this chapter.
Positive
Probe
Positive
Battery
Connector
Negative
Negative
Probe