![](http://pdfasset.owneriq.net/2/e1/2e1a1824-c786-48ab-b4b2-d7864465d837/2e1a1824-c786-48ab-b4b2-d7864465d837-bge2.png)
Upgrades Communications Card Installation - 16
7 Insert the card connector
into the communications
slot.
Note:
Be sure the hook
remains against the
outside of the logic
board fence.
8 Reset the logic board
following the procedure
in “Logic Board Reset”
in the Additional
Procedures chapter.
Communication slot
Card connector
Hook
Logic Board
Fence