Filter
Top Products
2 Attach one end of the video cable to the Video Out port on the VCR or camera.
Follow the directions that came with the VCR or camera.
3 Plug the other end of the video cable into either the S-video input port (
æ
) or the
composite video input port (
˜
) on the Macintosh.
If the connector doesn’t slide easily into the port, realign it and try again.
Don’t use force, which could damage the computer or cable.
4 Plug the RCA connectors on the audio cable into the left and right Audio Out ports on
the VCR or camera.
5 Plug the RCA connectors on the audio cable into the left and right audio input ports (
-
)
on the computer.
The following illustrations show S-video connections and composite video
connections for both a VCR and a camera. Your finished connections should
look like one of the following:
S-video connection for input from a VCR
S-video input
port
S-video Out
port
S-video cable
VCR
æ
Audio input
ports
(left and right)
Audio Out ports
(left and right)
Dual RCA-plug cable
(available at most electronics supply stores)
-
51
Connecting Additional Equipment