Filter
Top Products
ELITE SERIES USER MANUAL ENHANCED CP/M UTIL.
The “*” is the standard CP/M utility prompt to
indicate that the utility is waiting for a com—
mand.
The valid command syntax for PROFILE is:
[<u>:=]§<d>:<t>[<s>][,<d>:<t>[<s>]...]!*†
where <u> is the drive containing the copy of
the CP/M to be altered. <d> is the CP/M drive
who’s definition is to be altered within the
copy of the CP/M. <t> is the drive type to
which the drive is to be changed, as given
below. And <s> is the seek speed at which the
drive is to be positioned from track-to-track.
The “*” can replace the entire mess, telling
PROFILE to display the current system configura-
tion without making any changes.
The valid <t> entries are:
0 = Disk II
1 = Elite One
2 = Elite Two
3 = Elite Three
The valid <s> entries are:
S = Slow (all models)
M = Medium (all Elite models)
F = Fast (Elite Two and Three only)
The “<u>:” part is optional. If it is not
specified, then PROFILE will assume the change
is to be made to the currently booted in—memory
Page 10-25