Filter
Top Products
ELITE SERIES USER MANUAL DOS ENHANCEMENTS
To update the diskette, type:
<RETURN>
and PROFILE will over-write the old enhanced DOS
with the new one.
When it’s finished, it will return to the menu:
ENTER SELECTION (0-3)
1) LOAD NEW DOS IMAGE FROM DISK
2) CHANGE CURRENT DOS IMAGE SETTING
3) SAVE CURRENT DOS IMAGE TO DISK
0) TERMINATE PROFILE
Since you are finished with PROFILE for the time
being, type (without <RETURN>):
0
and PROFILE will terminate after saying:
THIS UTILITY DOES NOT APPLY YOUR
CHANGES TO THE CURRENTLY OPERATING DOS
IMAGE, SO YOU WILL NEED TO BOOT THE
DISKETTE TO WHICH YOU SAVED YOUR
CHANGES IN ORDER TO USE THE NEW
CONFIGURATION.
This is a reminder that the (in-memory) (current
operating) DOS has not been altered. Don’t
follow PROFILE’S instructions! This newly con-
figured diskette probably won’t boot correctly.
Following the termination message, the BASIC
prompt will appear.
Page 3—21