Filter
Top Products
ELITE SERIES USER MANUAL CP/M ENHANCEMENTS
Final Configuration Temporary Config.
Drive A: Drive B: Drive A: Drive B:
Disk ][ Disk ][ Disk ][ Disk ][
Disk ][ Elite One Elite One Disk ][
Disk ][ Elite Two Elite Two Disk ][
Disk ][ Elite Three Elite Three Disk ][
Elite One Disk ][ Disk ][ Elite One
Elite One Elite One Elite One Elite One
Elite One Elite Two Elite Two Elite One
Elite One Elite Three Elite Three Elite One
Elite Two Disk ][ Disk ][ Elite Two
Elite Two Elite One Elite One Elite Two
Elite Two Elite Two Elite Two Elite Two
Elite Two Elite Three Elite Three Elite Two
Elite Three Disk ][ Disk ][ Elite Three
Elite Three Elite One Elite One Elite Three
Elite Three Elite Two Elite Two Elite Three
Elite Three Elite Three Elite Three Elite Three
Any additional drives you may have (C:, D:, etc)
can he arranged in whatever final configuration
you like since these instructions will, for the
most part, ignore them.
Once you have your system into the temporary
configuration, it’s time to get started. Turn
on the computer with no disks in the drives. If
you have the Autostart feature, CP/M’s drive A:
should rattle for a hit and then sit there
quietly spinning waiting for a diskette. If you
have an old Apple, you may not have the Auto-
start feature, so you will need to tell your
Apple to start-up the drive.
Page 4-7