Filter
Top Products
Paper Jams
Chapter 5: Troubleshooting ❖ 5-9
Close Door E
Door E is open. Close Door E, the Gate Cover of the finisher.
Close Door F
Door F is open. Close Door F, the Transport Cover of the finisher.
Close Door G
Door G is open. Close Door G, the Top Cover of the finisher.
Close Staple
Door
The finisher’s stapler door is open. Close the stapler door.
Finisher Failure
Power Off/On
Problem with finisher elevator, stackers, or compiler tray. Power off the
printer. Then power it back on again.
Fin Fail H5-81
Power Off/On
Problem with finisher eject clamp. Power off the printer. Then power it back
on again.
Fin Fail H5-82
Power Off/On
Finisher tamper home sensor problem. Power off the printer. Then power it
back on again.
Fin Fail H5-83
Power Off/On
Finisher stacker offset home sensor problem. Power off the printer. Then
power it back on again.
Fin Fail H5-84
Power Off/On
Finisher tray sensor problem. Power off the printer. Then power it back on
again.
Fin Fail H5-85
Power Off/On
Finisher stacker upper limit switch problem. Power off the printer. Then
power it back on again.
Table 5.1 Paper Jam Messages
(continued)
Message Description/Corrective Action
Table 5.1 Page 3 of 7