Filter
Top Products
ARCHTTP PROXY SERVER INSTALLATION
116
5.4 For Solaris 10 x86
You must have administrative level permissions to install SATA
RAID software. This procedure assumes that the SATA RAID
hardware and FreeBSD are installed and operational in your
system.
The following details Solaris installation procedure of the SATA
RAID controller software.
1. Insert the RAID subsystem CD in the CD-ROM drive.
2. Copy <CD-ROM>\PACKAGES\Solaris\http directory to local
The next following step is the same with Linux. Please see section
5.2 For Linux.
5.5 For Mac OS 10.x
The McRAID manager interface can be accessed through the built-
in conguration and administration utility that resides in the con-
troller’s rmware. It provides complete control and management of
the controller and disk arrays, eliminating the need for additional
hardware or software.
The ArcHttp proxy server is provided on the CD-ROM delivered
with SATA card or download from the www.areca.com.tw. The
rmware embedded McRAID storage manager can congure and
monitor the SATA RAID controller via ArcHttp Proxy Server.
1. Login as root. Copy the ArcHttp le to a local directory.
(1). Insert the SATA RAID controller CD in the CD-ROM drive.
(2). Copy <CD-ROM>\PACKAGES\Mac\http directory to local.
Or
(1). Download from the www.areca.com.tw or from the email
attachment.
2. You must have administrative level permissions to install SATA
RAID controller ArcHttp software. This procedure assumes that the
SATA RAID hardware and Mac driver are installed and operational
in your system.
The following details are the installation procedure of the SATA
RAID controller for Mac ArcHttp software.