Filter
Top Products
APPENDIX
154
• Mode 0 Flash Jumper function:
Short: Causes cpu core to be held in rest (mode 0). Arcash utility
can upgrade the entire Flash ROM image.
Open: This is the normal default board operation.
The jumper name for each adapter to upgrade entire ash ROM im-
age as following:
ARC-1110/1120/1210/1220/1170 for 4/8/24 ports
→ J
3
ARC-1130(ML)/1160(ML)/1230/1260 for 12/16 ports
→
J7
ARC-1230ML/1260ML/1280ML/1280 for 12/16/24 ports
→
J2
• Starting the Arcash Utility
Arcash utility provides an on-line table of contents, providing brief
descriptions of the help sub-commands. You can use the <arcash>
/? to get detail information about the command. Typical output
looks as below:
Note:
The Mode 0 Flash jumper is a 2x5 connector without housing,
located on the left of card near bracket. The header size is
0.65mm and pitch size is 2.54mm.