Filter
Top Products
BIOS CONFIGURATION
69
disk drives, the “Expand Raid Set” function allows the users to
add disk drives to the RAID set that have already been created.
To expand a raid set:
Select the “Expand Raid Set” option. If there is an available
disk, then the “Select SATA Drives For Raid Set Expansion”
screen appears.
Select the target RAID set by clicking on the appropriate radio
button. Select the target disk by clicking on the appropriate
check box.
Press the Yes key to start expansion of the RAID set.
The new additional capacity can be utilized by one or more
volume sets. Follow the instruction presented in the volume set
Function to modify the volume sets; operation system specic
utilities may be required to expand operating system partitions.
Note:
1. Once the Expand Raid Set process has started, user
cannot stop it. The process must be completed.
2. If a disk drive fails during raid set expansion and a hot
spare is available, an auto rebuild operation will occur after
the RAID set expansion completes.
• Migrating
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Expand Raid Set
Main Menu
Quick Volume/Raid Setup
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid Set Function
Raid Set Function
Create Raid Set
Delete Raid Set
Expand Raid Set
Activate Raid Set
Create Hot Spare
Delete Hot Spare
Raid Set Information
Exp
Select Drives For Raid Set Expansion
[ ]Ch08| 80.0GBST380013AS
[*]Ch05| 80.0GBST380013AS
Are you Sure?
No
Yes