Filter
Top Products
10
Chapter 2 Installation and Setup
This chapter provides the following information:
• Package Contents
• Installation
• Setup
• Password Protection
• IP Assignment
• SNMP Host Access
2.1 Package Contents
The IntraCore 65120 package contains the following:
• IntraCore 65120 Series Gigabit Ethernet switch
• Getting Started Guide (printed)
• Power Cord
• Self-adhesive rubber feet for desktop placement
• Rack mount kit for rack installation
• IntraCore 65120 CD-ROM with user’s manual, utilities and product information
If any of these items are missing, contact your dealer immediately.
2.2 Installation Overview
The switch may be installed into an equipment or wall rack, or it may be placed on a level and stable
desktop surface.
The following guidelines will help you prepare to install the switch in such a way that it has the proper power
supply and environment.
2.2.1 Safety Overview
The following information provides safety guidelines to ensure your safety and to protect the switch
from damage.
Note: Be aware, however, that this information is intended as a guideline, and may not include every
possible hazard to which you may be exposed. Use caution when installing this switch.
• Only trained and qualified personnel should be allowed to install or replace this equipment.
• Always use caution when lifting heavy equipment
• Keep the unit clean
• Keep tools and components off the floor and away from foot traffic
• Avoid wearing rings or chains (or other jewelry) that could get caught in the switch. Metal objects
can heat up and cause serious injury to persons and damage to the equipment. Avoid wearing
loose clothing (i.e. ties or loose sleeves)
When working with electricity, follow these guidelines:
• Before accessing the interior of the switch, locate the emergency power-off switch for the room you
are in
• Disconnect all external cables before installing or removing the cover
• Do not work alone when working with electricity
• Always check that the power has been disconnected from the circuit
• Do not tamper with the equipment