Filter
Top Products
Connecting Network Devices
Page 2-11
Adding Fiber Optic Connectivity via MII
To add connectivity for 100Base-FX transmission media, insert the optional
MII fiber-optic module in the MII Module Slot in the back panel of the hub, as
shown in Figure 2-11. If you have not installed a management module, this slot
will be available for the fiber-optic connection module.
The MII Module Slot in the front panel of the hub is reserved for use when
there is a management module installed in the Management Module Slot on
the rear panel. For information on the use of this slot, see the Management
Module manual.
◆ Note: Do not use the MII Module Slot on the front panel to
install a fiber-optic module unless you have installed a man-
agement module in the rear panel.
Figure 2-11 MII Module Slot on rear panel
MII Module
Management Module Slot
SHBBook Page 11 Wednesday, March 3, 1999 8:03 PM