Asante Technologies II Switch User Manual


 
Page iv
Document Conventions
This manual uses the term “NetStacker II” to refer to the 12 port and 24 port
dual speed hubs, and “hub” to refer to all other Ethernet hubs.
This manual uses the following conventions to convey instructions and
information:
Note:
Noteworthy information, which contains helpful
suggestions or references to other sections in the manual, is
in this format.
Important!
Significant information that calls attention to
important features or instructions is in this format.
Important Safety Instructions
1. Read all of these instructions.
2. Save these instructions for later use.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
5. Do not use this product near water.
6. Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
7. The openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be placed near or over a
radiator or heat register. This product should not be placed in a built-in
installation unless proper ventilation is provided.
8. This product should be operated from the type of power source indicated on
the marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
9. This product is equipped with a three-wire grounding type plug, a plug
having a third (grounding) pin. This plug will only fit into a grounding type
power outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace your obsolete outlet. Do not
defeat the purpose of the grounding type plug.
10. Do not allow anything to rest on the power cord. Do not locate this product
where persons will walk on the cord.
SHBBook Page iv Wednesday, March 3, 1999 8:03 PM