Filter
Top Products
Hub ID Number LEDs
Page 3-3
Hub ID Number LEDs
The Hub ID LEDs are a numbered row of eight green LEDs. If your
NetStacker II hub is configured with other NetStacker II hubs in a stack, each
hub will get an auto-configured ID number, and the LED for that number will
be lit on each hub. If your hub is not part of a stack, the LED for ID number 1
will be lit.
If no Hub ID LED is lit on your NetStacker II hub, or if more than one hub in
a stack has the same ID number lit, there is a problem with the system. Check
with Asanté technical support.
Port Link Activity Indicator LEDs
All NetStacker II hubs include both 100Mbps and 10Mbps Link Activity LED
indicators for each port. These are the double rows of numbered green LEDs,
labeled “100Mbps” and “10Mbps”. On the 12 port hub, the ports and LEDs
are numbered 1–12. On the 24 port hub, ports and LEDs are numbered 1–24.
10Mbps Link Activity LEDs
The green 10Mbps LEDs (the lower row) indicate whether the ports are
connected and if 10Mbps link pulses are detected at the port.If the 10Mbps
link pulse is detected, the LED will be lit. The LED will blink when data is
transmitting on the link.
100Mbps Link Activity LEDs
The green 100Mbps LEDs (the upper row) indicate whether the port is
connected and if 100Mbps link pulses detected. If the 100Mbps link pulse is
detected, the LED will be lit. The LED will blink when data is transmitting on
the link.
SHBBook Page 3 Wednesday, March 3, 1999 8:03 PM