Filter
Top Products
28 AP100 Hardware Reference Guide
III. Power Information
III. Power Info.
Power Supply
III. Power Information
Power Supply (ST-251HR)
Input
Output
DC Output Cond.: Load (Amp) Min Nom Max Ripple(mV) Noise(mV)
+3.3V* 1.5 7.50 15.0 50 100
+5.0V* 2.0 10.0 20.0 50 100
+12V 1.2 6.00 12.0 120 240
-05V 0.0 0.25 0.50 100 200
-12V 0.0 0.25 0.50 120 240
+5VSB 0.0 0.50 1.00 50 100
(* +3.3V and +5V Total Output Limit: 100W)
Output Rating: +5V +12V +3.3V -12V -5V
Max +5.25V +12.60V +3.465V -12.60V -5.25V
Min +4.75V +11.40V +3.135V -11.40V -4.75V
Tolerance ±5% ±5% ±5% ±5% ±5%
Remote On/Off Control: PS-On TTL Low/Close DC Outputs are to be Enabled
PS-Off TTL High/Open DC Outputs are to be Disabled
Line Regulation: +3.3V: 1% Max
+5.0V: 1% Max
Load Regulation: +3.3V: 5% Max
+5.0V: 5% Max
Cross Regulation: +5V 20A: 4.75V Min and +12V 1.2A: 12.60V Max
+5V 2A: 5.25V Max and +12V 12A: 11.40V Min
Temperature Arrangements: 1% Max
Slow Start Time: 5ms to 50ms
Power Good Time: 100ms to 500ms
Hold up Time: 20ms Min (at Nominal Input)
Power Fail Time: 1ms Min (at Nominal Input)
Input Current
Input 115VAC/Max 6A (Full Load)
Input 230VAC/Max 4A (Full Load)
Frequency
50Hz - 60Hz
50Hz - 60Hz
In-Rush Current Max.
Input 115VAC/Max 79A (Full Load)
Input 230VAC/Max 79A (Full Load)
Voltage Minimum Nominal Maximum
Low Range 100VAC 115VAC 132VAC
High Range 180VAC 230VAC 264VAC