Asus AP100 Computer Accessories User Manual


 
8 AP100 Hardware Reference Guide
I. Introduction
I. Introduction
Checklist
This Server
The AP100 is a startup server configured on the ASUS P2B-S smart mother-
board which uses the 440BX chipset from Intel which supports the Pentium II
processor and 100MHz front side bus in order to support any complicated task.
Component Checklist
If assembling this server by yourself, it is important to prepare all the server
components before starting. This will save a great deal of time by not hav-
ing to hunt down components. The following checklist provides a guideline
as to the necessary components for a server.
Standard components
Chassis: ASUS T-10 Tower
Power Supply: 350W ATX
Motherboard: ASUS P2B-S
CD-ROM Drive: ASUS 34X
Floppy Drive: 1.44MB
Cables: Power, IDE, Floppy, 50&68pin SCSI, CD audio cable
SCSI Terminator: Passive terminator for 68pin SCSI cables.
User’s Manuals: CD-ROM, SCSI, Motherboard
Drivers/Utilities: SCSI, CD-ROM, Motherboard
Required components (you may purchase from ASUS or from a third party)
Processor (CPU): (optional Intel Pentium II 233MHz-450MHz)
Memory Modules: (optional ASUS 16MB or 32MB SDRAM)
Hard Disk Drives: (optional 4/9GB Ultra2 or Fast/Ultra-Wide SCSI)
Optional components (you may purchase from ASUS or from a third party)
Ethernet Card: (optional ASUS PCI-L101)
NOTE: Optional components are ordered on demand and may not always
be available in the quantities desired.