Asus ASMB3-SOL Network Card User Manual


  Open as PDF
of 70
 
2-10 Chapter 2: Installation
You must congure the network settings of both the remote server and the local/
central server to establish communication for remote server control and monitoring.
Prepare the support CD and a bootable oppy disk to congure the network
settings.
Running the BIOS IPMI conguration
To congure the IPMI in the BIOS:
1. Restart the remote server, then press <Del> during POST to enter the BIOS
setup.
2. Go to the Server menu, then select the IPMI Conguration sub-menu. Use
this sub-menu to congure the IPMI settings.
3. When nished, press <F10> to save your changes and exit the BIOS setup.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
Server Features
Remote Access Conguration
IPMI Conguration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
IPMI Conguration
BMC Firmware version: 1.00-1.00
Boot Option Uses [System]
BMC Watchdog Timer Action [Disabled]
Timeout Value [ 0]
Clear System Event Log [Disabled]
BMC Time Sync. [Enabled]
System Event Log
LAN Setting
IPMI Conguration
System: Boot Option
is controlled by
BIOS.
BMC: Boot Option is
controlled by BMC.
 previous next