Filter
Top Products
3-24 Chapter 3: Software support
3.2.5 Set
The Set command controls the host interface type and the correct BMC time.
You can select from the following interfaces:
KCS Interface - Keyboard Controller Style
SMIC Interface - Server Management Interface Chip
BF Interface - Block Transfer
PCI Interface - Peripheral Component Interconnect
3. When nished, press <Esc> to return to the main screen.
To set the BMC Timer:
1. Select BMC Timer from the Set command option, then press <Enter>.
2. Set the BMC IPMI timer to the current system time.
3. When nished, press <Esc> to return to the main screen.
To select the host interface:
1. Select Host Interface from the Set command option, then press <Enter>.
The screen displays the host interfaces supported by the server management
board.
2. Use the down arrow button to select a host interface, then press <Enter>.