Filter
Top Products
ASUS ASMB2ASUS ASMB2
ASUS ASMB2ASUS ASMB2
ASUS ASMB2
2-52-5
2-52-5
2-5
2.3 Firmware update
You need to update the Broadcom
®
IPMI and ASMB2 firmware before you
start using the ASMB2 board.
2.3.12.3.1
2.3.12.3.1
2.3.1
For motherboards without ASF functionFor motherboards without ASF function
For motherboards without ASF functionFor motherboards without ASF function
For motherboards without ASF function
supportsupport
supportsupport
support
To update the firmware:
1. Insert the support CD into the optical drive.
2. Restart the remote server, then press <Del> during POST to enter the
BIOS setup.
3. Go to
Boot Boot
Boot Boot
Boot menu and set the Boot Device Priority item to [CD-ROM].
4. When finished, press <F10> to save your changes and exit the BIOS
setup.
5. On reboot, the main menu appears. Type
bb
bb
b.
a> FreeDOS command prompt
b> Broadcom IPMI Firmware Update
c> ASMB2 Firmware Update
Please choose a to c:
_
6. A screen confirming whether or not you want to update the firmware
appears. Press <Y> to update; otherwise, press <N>.
7. After the update, the screen goes back to the main menu. Type
cc
cc
c.
8. A screen confirming whether or not you want to update the firmware
appears. Press <Y> to update; otherwise, press <N>.
9. When the update is complete, turn off the system and unplug the AC
power cord.
2.3.22.3.2
2.3.22.3.2
2.3.2
For motherboards with ASF function supportFor motherboards with ASF function support
For motherboards with ASF function supportFor motherboards with ASF function support
For motherboards with ASF function support
To update the firmware:
1. Follow steps 1 ~ 4 of the previous section.
2. On reboot, the main menu appears. Type
cc
cc
c.
a> FreeDOS command prompt
b> Broadcom ASF Firmware Update
c> Broadcom IPMI Firmware Update
d> ASMB2 Firmware Update
Please choose a to d:
_
3. A screen confirming whether or not you want to update the firmware
appears. Press <Y> to update; otherwise, press <N>.
4. After the update, the screen goes back to the main menu. Type
dd
dd
d.
5. A screen confirming whether or not you want to update the firmware
appears. Press <Y> to update; otherwise, press <N>.
6. When the update is complete, turn off the system and unplug the AC
power cord.