Asus CROSSHAIRVFORMULAZ Computer Hardware User Manual


  Open as PDF
of 190
 
3-20
Chapter 3: BIOS setup
Chapter 3

Bank Interleaving [Auto]
Conguration options: [Auto] [Disabled]
Channel Interleaving [Auto]
Conguration options: [Auto] [Disabled]
Warm Boot RAM [Enabled]
Allows you to reuse data in RAM after warm boot to speed up boot.
Conguration options: [Disabled] [Enabled]
Memory Clear [Disabled]
Allows you to clear the settings saved in RAM.
Conguration options: [Disabled] [Enabled]
ECC Mode [Enabled]
Enables or disables the DRAM ECC mode that allows the hardware to report and
correct memory errors.
[Disabled] Disables the DRAM ECC mode.
[Enabled] Set to [Enable] to adjust ECC mode automatically.
Power Down Enable [Disabled]
Enables or disables the DDR power down mode.
Conguration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Conguration options: [Disabled] [Enabled]
DCT Unganged Mode [Enabled]
Conguration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select which graphics controller to use as the primary boot device.
Conguration options: [PCI/PEG] [PEG/PCI]
 
HPET [Enabled]
Allows you to set the HPET timer.
Conguration options: [Disabled] [Enabled]
 previous next