Filter
Top Products
3-12
Chapter 3: BIOS setup
Chapter 3
CPU Power Duty Control [T.Probe]
This item adjusts the current and thermal of every VRM phase component.
[T.Probe] Maintains the VRM thermal balance.
[Extreme] Maintains the VRM current balance.
CPU Power Response Control [Auto]
Allows you to control the CPU Power Response.
Conguration options: [Auto] [Regular] [Medium] [Fast] [Ultra Fast]
CPU Power Thermal Control [130]
Allows you to control the CPU Power thermal value.
Conguration options: [130] ~ [151]
VRM Spread Spectrum [Disabled]
This item appears only when you set the CPU Power Switching Frequency to [Auto]. It
allows you to enable the spread spectrum to enhance system stability.
Conguration options: [Disabled] [Enabled]
CPU/NB Load-Line Calibration [Auto]
Allows you to select the CPU/NB Load-Line mode.
Conguration options: [Auto] [Regular] [High] [Extreme]
CPU/NB Currrent Capability [Auto]
This item provides wider total DRAM controller power range for overclocking. A higher
value brings a wider total power range and extends the overclocking frequency range
simultaneously.
Conguration options: [Auto] [100%] [110%] [120%] [130%]
CPU/NB Power Response Control [Auto]
Allows you to control the CPU/NB Power Response.
Conguration options: [Auto] [Regular] [Medium] [Fast] [Ultra Fast]
DRAM Current Capability [100%]
Allows you to set the DRAM current capability.
Conguration options: [100%] [110%] [120%] [130%]
DRAM Power Phase Control [Optimized]
Allows you to set the DRAM power phase control.
Conguration options: [Optimized] [Extreme]
DRAM Power Switching Frequency [300KHZ]
Allows you to set the DRAM voltage frequency.
Conguration options: [300KHZ] [350KHZ] [400KHZ] [450KHZ] [500KHZ]
Extreme OV [Disabled]
This item is set to [Disabled] by default to protect the CPU from being overheated. Set this
item to [Enabled] to choose a higher voltage to overclock, but doing so might decrease CPU
life.
Conguration options: [Disabled] [Enabled]