Asus DSEB-D16/SAS Computer Hardware User Manual


 
ASUS DSEB-D16 Series 5-9
Using New Conguration
When a RAID set is already existing, using the
New Conguration
command
erases the existing RAID conguration data. If you do not want to delete the
existing RAID set, use the
View/Add Conguration
command to view or create
another RAID conguration.
To create a RAID set using the
New Conguration
option:
1. From the utility main menu, highlight
Congure
, then press <Enter>.
2. Use the arrow keys to select
New Conguration
, then press <Enter>.
3. Follow steps 3 to 7 of the previous section.
4. Select
Size
from the
Logical Drive
menu, then press <Enter>.
5. Key-in the desired logical drive size, then press <Enter>.
6. Follow steps 8 to 13 of the previous section to create the RAID set.
LSI Logic Software RAID Conguration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Clear Existing Conguration And Start A New Conguration
Conguration Menu
Easy Conguration
New Conguration
View/Add Conguration
Clear Conguration
Select Boot Drive
LSI Logic Software RAID Conguration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
PORT #
DNLIN A00-00
DNLIN A00-01
0
1
Easy Conguration - ARRAY SELECTION MENU
Logical Drive(s) Congured
LD RAID Size #Stripes StripSz Status
0 1 77247MB 2 64 KB ONLINE
Logical Drive 0
RAID = 1
Size = 77247MB
DWC = Off
RA = On
Accept
SPAN = NO
Enter VD Size (MB):
Enter VD Size (MB): 77247