Asus DSEB-D16/SAS Computer Hardware User Manual


  Open as PDF
of 200
 
5-10 Chapter 5: RAID conguration
5.2.2 Creating a RAID 10 set
You can create a RAID 10 set using four identical hard disk drives.
To create a RAID 10 set using the Easy Conguration option:
1. From the utility main menu, highlight
Congure
, then press <Enter>.
2. Use the arrow keys to select
Easy Conguration
, then press <Enter>.
3. The
ARRAY SELECTION MENU
displays the available drives connected to
the SATA ports. Select the drive(s) you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from
READY
to
ONLIN A[X]-[Y
], where X is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the
screen.
LSI Logic Software RAID Conguration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Denes Physical Arrays. An Array Will Automatically Become A VD
Conguration Menu
Easy Conguration
New Conguration
View/Add Conguration
Clear Conguration
Select Boot Drive
LSI Logic Software RAID Conguration Utility Ver A.51 Aug 13, 2007
SPACE-Sel,ENTER-EndArray,F10-Congure,F2-Drive Info,F3-Logical Drives,F4-HSP
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Port # 0 DISK 77247MB HDS728080PLA380 PF20A60A
Easy Conguration - ARRAY SELECTION MENU
PORT #
READY
READY
READY
READY
0
1
2
3
 previous next