Filter
Top Products
5-18 Chapter 5: RAID conguration
5.2.4 Initializing the logical drives
After creating the RAID set(s), you must initialize the logical drives. You may
initialize the logical drives of a RAID set(s) using the
Initialize
or
Objects
command on the
Management Menu
.
Using the Initialize command
To initialize the logical drive using the Initialize command:
1. From the
Management Menu
, highlight
Initialize
, then press <Enter>.
2. The screen displays the available RAID set(s) and prompts you to select the
logical drive to initialize. Use the arrow keys to select the logical drive from
the
Logical Drive
selection, then press <Enter>.